Round column metal molds are a variety of special molds used for high altitude columns and low cross -section diameter (up to 3 meters). A circular metal mold consists of two semicircular segments (2 ° C) with a strap of 1*2 mm.

Parts of round column molding are connected to each other with collaps or pins and wedges. The use of collps provides more strength and has more tolerance of concrete pressure. By increasing height, bolts are used to connect crescent metal molds.

from round column for bridges and construction of bridges, very high altitude buildings and towers, parking and massive concrete construction more than 2 meters.

Benefits

Method

In projects where we need to use round mold, we first connect the appropriate template spacers. Then lubricate the circular column molds. This prevents the mold from sticking to the concrete column.

After lubrication, place the circular mold into the relevant location and then connect the different parts of the mold to each other with a frog pin. Finally, if the column diameter is more than one meter, the steel amplifier should be used to prevent the cross section. Then we do the concrete and open the templates in accordance with the national regulations.

Price and purchase metal molding round column

The price of the round column mold depends on a variety of factors, including the quality, thickness of the sheet used and most importantly than all the steel market fluctuations. To buy a round column mold, it must pay attention to its quality because it will cause a great deal of damage to the project if the mold is not good quality and in the heights.