Karimi Concrete Equipment
Karimi Concrete Equipment
1740904137661.webp

Description

Comments

General specifications

No specifications have been registered for this product.

Simple Ceiling Jack is one of the most used equipment in the construction industry. A simple building jack is used to inhibit the underlying, columns and walls, inhibit one -way walls, and the foundation mold and structural support. Usually simple jacks are not used under the voters because the alignment of the boots will have difficulty.

Types of Simple Construction Jack

Due to the thickness of the pipe, the building jacks fall into two groups of lightweight ceiling jack and heavy ceiling jack.

Simple Ceiling Jack

The thickness of the external and interior pipes in the light jack is 2 mm.

Simple Simple Ceiling Jack

In the heavy building jack, the thickness of the bottom of the jack and the upper pipe is 1.5 mm. Heavy ceiling jack has more load tolerance than lightweight jack and is used for wider projects.

Height

Construction jacks are manufactured at different heights of 1.5 meters, 2 meters, 2.5 meters and 2 meters.

1.5 meters simple building jack

The 2.5 meter ceiling jack, which is the most common type of jack, consists of a 1.5 meter base jack and a 2 -meter male pipe.

Simple 2 -meter building jack

The simple 2 -meter ceiling jack is produced in two types of pipes according to the height of the pipes: 2 -meter jack with 2 meters outer tube and 2 meters inner tube 2m jack with an outer pipe of 1.5 meters and an inner pipe of 1.5 m Of the two types of 2 -meter building jack, the jack is more commonly used with the bottom of the jack because the jack base is shorter and easier to access.

1.5 meters simple building jack

This jack consists of a 2 -meter bottom jack and a 1.5m male pipe. The use of a 2.5 meter and 2 meter ceiling jack is less common due to the high lean coefficient.

Simple 2 -meter building jack

The simple 2 -meter building jack has a lower tube of 2 meters long and the upper tube is 2 meters long. According to the building standards, it is best to use triangular scafold instead of using high jacks.

Technical specifications

Simple building jack has a male pipe, pistility, a jack thread, a insole sheet and an upper sheet. The most important part of the simple roof jack is its thread, because if it is not good quality, the jack will be fractured in the thread site. The male pipe is 2 cm in diameter. The jack pistil is 2 cm in diameter. Due to the light or heavy, the pipes are produced at a thickness of 1 mm and 1.5 mm. The simple building jack has a length of 2 cm and step 1 or 2.

In the upper part of the jack instead of the cross or the U -shaped Iraqi Jack, there is a sheet of 1*2 cm and a thickness of 2 mm. The jack floor sheet also has a dimension of 1*2 cm. There are two holes on the male tube of the building jack to adjust the height. After producing the building jack they are covered with blue oil paint.

Price and purchase

Two factors of quality and price are very important for buying a simple building jack. Construction jacks are used in the molding and concrete process in large numbers. By purchasing a reasonable price jack you can significantly reduce costs. Of course, you should not be able to buy cheap jacks. If the building jack is not of good quality, it will be curved or fractured while working and will cause a lot of damage to the project.

Karimi Concrete Equipment, manufacturer of molding equipment, produces the best quality jack and sells it at a reasonable price. Contact our experts to inquire and buy a simple ceiling jack.