Karimi Concrete Equipment
Karimi Concrete Equipment
1740904987506.webp
1740904971802.webp

Description

Comments

General specifications

No specifications have been registered for this product.

The Moving Crusade Jack is one of the molding equipment that is standing under the ceiling. The moving cruciate jack acts as a restraint during concrete and prevents the structure from collapsing until the concrete is dry. The cross of this type of jack is capable of moving and changing angles. For this reason, it is called the moving cross.

the roof of the structure is very weight and the ceiling jack tolerate the weight of the ceiling. The Crusade Ceiling Jack has a variety of dimensions and sizes and is used for any type of ceiling, such as block joists, steel decks, waffles, monoliths and more. Ceiling jack plays an important role in temporary preservation of the ceiling and structures.

Crucial jack

External pipe (jack base tube)

Internal pipe Jack Thread Sarjak Inhibitory arm Insole sheet

Types of Moving Cross

The cross -crucified roof jack is divided into the following two categories: the thickness of the pipe: Lightweight ceiling jack Heavy ceiling jack

Lightweight ceiling jack

If the ceiling jack is used in the inner and outer pipe of 2 mm thick, we will have a light ceiling jack.

Heavy ceiling jack

The heavy moving cross ceiling jack is produced from the inner tube and the outer pipe with a thickness of 1.5 mm. Heavy ceiling jack is more loaded than lightweight jack.

T -shaped jack according to the type of cross also includes the following two categories.

The jack of the Movie Cross

The jack of the cans of the cans

A cans of 1 cm in size is used to produce a can of a cans of 1*2 cm. The thickness of this profile is 1.5 mm and its length is 2 cm.

The cruciate crusade jack

This type of ceiling jack is produced from a 5 cm long stud and a thickness of 1.5 mm. The length of the life is 2 cm and the length of the wings is 2 cm.

Height

The mobile cross ceiling jack is produced at heights of 1.5, 2, 2.5 and 2 m.

1.5 meters of mobile cross

The ceiling jack is 1.5 meters of the most used ceiling jack. The 2.5 meter ceiling jack contains an external tube at a height of 1.5 meters and an inner tube at a height of 2 meters. This jack can be used up to 2 meters high.

2 -meter cross jack

The 2 -meter ceiling jack is one of the most used jacks. In the 2 -meter -long T -shaped ceiling jack, both the upper pipe and the upper are 2 meters high. Another type of 2 -meter ceiling jacks is produced, with a lower tube being 1.5 meters high and the upper pipe is 2.5 meters high and its use is more common because the base height is less and easier to access.

Jack 1.5 meters of mobile cross

The 1.5 meters of the mobile cross has a jack base tube at a height of 2 meters and an inner pipe at a height of 1.5 meters. The use of this jack is less common because it is best to use jacks up to 2 meters in height.

2 -meter cross jack

The 2 -meter -high ceiling jack has a pistility of 2 meters high and a male tube at a height of 2 meters. The 2 -meter ceiling jack has a high lean coefficient. Therefore, it is best to use a triangular scaffolding above 2 meters.

Technical specifications

In the Moving Cross Ceiling Jack, the head is animated and adjustable. Therefore, they have more flexibility than constant ceiling jack. Of course, the removable connection can be a disadvantage because the resistance of the jacks at the location of the mobile head is reduced and there is a possibility of losing and loosening of the joint in high -pressure conditions.

The crusade is a steel crusade. The inner pipe diameter is 2 cm and the outer pipe diameter is 2 cm. The thickness of the pipes is 2 mm for the production of a lightweight ceiling jack and 1.5 mm to produce heavy ceiling jack. Jacks have holes to adjust height. These holes are built at 2 cm intervals. The number of holes depends on the height of the inner tube and is drilled from about 2 cm from the bottom of the male tube to about 2 cm above the pipe.

attaches to the central tube from the studs or cans of two inhibitory arms. These arms are two pipes 2 cm in diameter with a diameter of 1 to 2.5 cm and a thickness of 1.5 mm. At the lowest part of the ceiling jack is a 2*2 cm insole with a thickness of 2 mm

In the middle of the jack, a jack thread is embedded to adjust the height. The length of the jack's thread is 2 cm and its diameter is 2 cm. The thickness of the jack is 2 mm and is produced in 1 and 2 cm steps. Jacks are covered with blue oil.

Price and purchase

The price of a mobile ceiling jack depends on a variety of factors, including lightness and heavy, height and quality. Also, the steel market fluctuations are the determining factor in the price of the ceiling jack.

In the projects where the Cross Cross Jack is used, many jacks are needed. According to a general rule, if the roof load is 1.5 tons per square meter, approximately every 2 meters of a ceiling jack is used. The roofs of the structures are very weighty, so it is important to use high quality sub -ceiling jack. Ceiling jacks that are of poor quality will probably cause irreparable damage.
Buying a high quality ceiling jack and reasonable price can reduce the cost of project formatting and ultimately we will have a good output and strong structure. Karimi's concrete equipment, manufacturer of molding equipment, sells mobile cross ceiling jack at the best quality and lowest price. Contact our experts to inquire and purchase a Moving Crusade Jack.