1741069705748.webp
1741069741021.webp

Description

Comments

General specifications

No specifications have been registered for this product.

Ceiling jacks are one of the most used tools of the construction industry under the roof and concrete mold. The Iraqi ceiling jack acts as a roof support and then transmits the load of concrete to the ground.

One of the types of ceiling jacks are Iraqi jacks that have a paste at the top, which is why they are also known as the U -shaped jack. The U -shaped ceiling jack is most commonly used in Iraq. That's why they are also called the Iraqi jack. The export jack is used in a variety of beams, composites, chromite joists and multiple arches.
جک سقفی عراقی

Types of Export Ceiling Jack

Iraqi jack can be divided into two categories:

Iraqi Ceiling Jack. A heavy Iraqi ceiling jack

Iraqi Jack

In the ceiling jack, the base tube thickness and brain pipe are 2 mm

Heavy Iraqi jack

In the heavy ceiling jack, the thickness of the inner tube and the outer tube is 1.5 mm. Heavy Ceiling Jack has more compressive strength than lightweight roof jack
جک سقفی عراقی

The heights of the U -shaped jack

U -shaped jacks are manufactured at heights of 1.5 meters, 2 meters, 1.5 m and 2 m.

Iraqi jack 1.5 meters

In the U -Form, a 1.5 meter high height of the pistil pipe is 1.5 meters and the height of the male pipe is 2 meters. The Iraqi Jack is the most common size of the Iraqi jack.

Iraqi jack 2 meters

The 2 -meter export ceiling jack is one of the most common and used jacks in the construction industry and is produced with two structures: 2m jack with 2 m outer tube and 2 m inner tube The 2 -meter jack with an outer pipe of 1.5 meters and the inner pipe of 1.5 meters, which is shorter due to the jack base and easier access.

Iraqi jack 1.5 meters

Jack Yu is a 1.5m -1 meter -old jack and a brain -based of 1.5 meters. The use of a ceiling jack with this height and height is less common.

Iraqi jack 2 meters

The 2 -meter Iraqi jack has a 2 -meter pistil and a 2 -meter male pipe. It is not recommended to use the ceiling jack for 2 meters and it is best to use the omega scaffolding.
جک سقفی عراقی

Technical specifications

The Iraqi ceiling jack consists of two pipes, including the inner pipe (male) and the outer pipe (pistil). A jack thread is in the middle of the Iraqi jack and a 2*2 cm insole in the lowest part of the jack. There is a gutter as a head at the highest part of the jack. The male part of the jack (cerebral) is a steel pipe of 2 cm in diameter and the pistachio tube has a diameter of 2 cm. The Iraqi jack is 2 cm long and steps 1 and 2. The Iraqi jack is made of 2*2 mm raw sheet with a thickness of 2 mm, which is 2 cm in tidyle and 2 cm wings.

are among the differences between the Iraqi jack and the simple cruciate jacks, the dimensions of the sheet and the length of the thread. In the Iraqi jack, the dimensions of the insole sheet is 1*2 cm. However, in the simple jack and the cruciate jack, the floor sheet dimensions are 1*2 cm. Also used in the rest of the roof jacks, a 2cm jack is used and in the Iraqi ceiling jack the thread is 2 cm.

to adjust the height, the internal tube is drilled. The holes are such that the first hole is mounted about 2 cm from the bottom of the tube. The next drilling is 2 cm from the previous hole and continues to about 2 cm from the top of the tube.
جک سقفی عراقی

Price and purchase

Two factors of price and quality must be considered to buy an Iraqi ceiling jack. In projects that use a ceiling jack, if the roof load is less than 1.5 tons, a ceiling jack is needed per meter. The number of jacks will increase if the ceiling load is more than 1.5 tons. Therefore, by purchasing the reasonable price jack you can reduce the cost. On the other hand, the ceiling of each structure is very weighty and this time it must be tolerated by the sub -roof jack. Projects that use an inappropriate ceiling jack are likely to be tilted or broken and the roof breaks. Therefore, by purchasing high quality and high quality jacks, irreparable damage to the project can be prevented.

Karimi Concrete Equipment, manufacturer of molding equipment, sells U -shaped ceiling jacks with the best quality and kilo. Contact our experts to inquire and purchase Iraqi ceiling jack from the factory.

جک سقفی عراقی